Ceramic Tile Drilling Tips For Beginners

By Jim Lance | February 25, 2009

At home there are some things that you will do for home improvement and these things are more likely than not involve things like putting up a soap shelf or a towel holder in your bathroom. This may involve drilling the tiles also.

Talking of ceramic tiles these tiles have a soft inner core but a very hard outer surface and that means that while drilling it will be much herder to penetrate the outer surface initially. The ceramic tiles get their hardness by the baking of the clay and the clay composition depends on the region in which you procured the tiles.

The drill bit used for drilling into a ceramic tile is known as the carbide drill bit. While drilling using the drill bits there intense heat which is generated and you need to have the cooling elements like water or oil nearby to take away the heat. The other drill that can work is the diamond drill bit but these are expensive though they are the best when it comes to glass or ceramic drilling.

The outer glazed surface of the ceramic tile is very hard and brittle hence you need top be careful about two things. The first one is that never use the hammer drill. Secondly always drill at very slow speeds when drilling the glazed hard surface of the tile.

While drilling make sure that are doing it very slowly because if the drill slips away then it can cause scratch marks on the tile and you will not be able to use the tile with the scratch marks. You need to very careful when doing the initial first drill on the tile.

You will need to very careful and patient while drilling the hole with the drill. That way you will ensure that the drill has a longer life and also there is no damage to the tile.

The author writes about the sintered diamond drill bits and also guides on how to cut glass using the diamond drill bits.

Article kindly provided by UberArticles.com

Topics: Home Improvement | Comments Off

Comments are closed.