Home | Recreation-and-sports

Flying High With a Skateboarding Ramp

Sooner or later, everyone who rides a skateboard, bike or inline skates has to try a skateboarding ramp. So many cool skateboarding tricks can be performed on a ramp, and it is not too difficult to build one at home. Having a ramp at home lets you practice your skateboarding moves in peace and quiet. After all, who wants to take a lot of beginners' wipe outs in public? With some plywood, a few pieces of 2" by 4", and the proper tools, you can build your own skateboarding ramp at home.

The first step is to check out skateboarding ramps you like and measure heights and curves, keeping in mind your own skill level. Next, compile your notes and draw up your own plans. When you are happy with it, draw the curve of the transition (the side) shape onto a big enough piece of plywood. When it is right, cut the curve out using a jigsaw. Sand the edges by hand or use an electric sander.

To make the other transition, lay another sheet (or the other half of the first transition, if the scrap is big enough, on the floor. Take your completed transition and place it on top, transferring the curve with pencil. Cut and sand this transition and the sides for your skateboarding ramp are finished.

Brace the corners with lengths of 2" by 4". When you are positioning your transition shapes, you can save time by making the width equal to that of the flexible double ply you will be using for your skateboarding ramp itself. Screw pieces of 2" by 4" six inches apart to bear the weight of the floor. The more accurate your work, the more sturdy and long lasting your skateboarding ramp will be. The screws should go from the inside out. Piloting the holes with a drill will avoid splintering the wood.

Now you're ready for the ramp itself. Glue and nail the floor on, paying close attention that no screws or nails are poking out onto the ramp surface, otherwise, look out for some severe tire damage! Finally, add a thin metal strip to the bottom of the ramp for a smooth landing.

One last word: try your weight on your skateboarding ramp before you go for a test drive! Otherwise, your inaugural flight could be bumpy!

Article Source: http://www.uberarticles.com/articles

If you're interested in building your own skateboarding ramp, make sure to get the skating gear to make your maiden voyage a safe one. This and other unique content skateboarding ramp articles are available with free reprint rights.

This article is licensed under a Creative Commons Attribution-No Derivative Works 3.0 Unported License, which means you may freely reprint it, in its entiretly, provided you include the author's resource box along with LIVE VISIBLE links (without "nofollow" tags).